admission@svcet.ac.in 0413-2644426 / +919884305050
Home >Academics >Department >Mechanical Engineering Faculty

TEACHING FACULTY DETAILS:

S.NO NAME DESIGNATION QUALIFICATION MAIL-ID CONTACT NUMBER
1. Mr.B.Magimai Raj. Assistant Professor / HOD M.E, Ph.D., magimairaj.in@gmail.com 9677835595
2. Mr.S.Ravindran Assistant Professor M.Tech, (Ph.D) ravi.indranmech@gmail.com 9790672303
3. Mr.M.Natraj Assistant Professor M.E., nataraj2289@gmail.com 9789163888
4. Mr.V.Karthikeyan Assistant Professor M.Tech, mail2karthikeyan@gmail.com 9790578103
5. Mr. R. Kamalanathan Assistant Professor M.E., r.kamal.nathan@gmail.com 9500614186
6. Mr. G.Palanivel Assistant Professor M.E., palanivel.g14@gmail.com 9698803994
7. Mr. S.Sugumar Assistant Professor M.E., s.sugumar73@gmail.com 7904225411
8. Mr. C.Manikandan Assistant Professor M.E., manithcae@gmail.com 9499058690

NON-TEACHING FACULTY DETAILS:

S.NO NAME DESIGNATION QUALIFICATION MAIL-ID CONTACT NUMBER
1. G.SRINIVASAN Senior Lab Assistant DME srinivasangmile@gmail.com 9943540670
2. S.VEERABATHIRAN Lab Assistant B.E ksveerabathiran@gmail.com 8148886442

FACULTY ACHIVEMENTS:

S.NO FACULTY NAME FACULTY ACHIVEMENTS
1. Dr.B.Magimi Raj

1. B. Magimai Raj and T. Senthilvelan, “Analysis of Mechanical Properties on Friction Stir Welded Magnesium Alloy by Applying Taguchi Grey Based Approach”, Materials Today-ElsevierVol. 5 (2018), pp. 8025–8032.

2. B. Magimai Raj and T. Senthilvelan, “Experimental and Parametric analysis of Friction Stir Welding on AA 8011-H14 Using Multi-Objective Taguchi-Based Grey Relational Analysis,” Measurement- Elsevier Manuscript No. MEAS-D-16-02147

3. Short Term Course under Quality Improvement Programme on “Advances in Materials Processing Techniques” organized by Department of Mechanical Engineering, Pondicherry Engineering College under the sponsorship of AICTE Govt. of India.

4. Attended DST sponsored National Seminar on E-Waste management at Kongu College of Eng., at Erode on 11 & 12.01.2019.

2. Mr.M.Nataraj

1. “Design of angular way drilling machine” International Research Journal of Engineering and Technology (IRJET), ISSN: 2395-0056 Volume: 05 Issue: 12 | Dec 2018 www.irjet.net p-ISSN: 2395-0072.

2. “Design of Multi way Drilling Machine” International Journal of Engineering Science and Computing Dec 2018 vol 8 issue 12 ISSSN 23213361 @ IJESC.

3. Attended National Workshop on “Internet of Things using Smart Grid” conducted by National Power Training at Trichy.(2018)

4. Attended two day DST sponsored National Seminar on Battery Waster Management conducted by Kongu Eng., College ,Erode.(2019)

5. Attended one day workshop on “Injection Moulding” at sathiya mangalam-(2017)

3. Mr.S.Ravindran

1. Pursuing Ph.D

2. “Design of angular way drilling machine” International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 12 | Dec 2018 www.irjet.net p-ISSN: 2395-0072.

3. Published,“Study on hybrid glass/carbon fiber reinforced vinyl ester polymer composite” in International Research Journal of Engineering and Technology (IRJET) Volume 5, Issue 12, December 2018.

4. Attended two day DST sponsored National Seminar on Battery Waster Management conducted by Kongu Eng., College ,Erode.(2019)

5. Attended one day FDP on “Problem Solving” atSVCET. Presented a Paper on “Modelling and Simulation of concentrator Pv-cell to improve the conversion efficiency of Pv-system” atSVCET, ICRIEST 18.

4. Mr.V.Karthikeyan

1. Published “Cuttingattachment using hacksaw machine” in Journal of emerging technologies and innovative Research (JETIR) Volume 5, Issue 7, January 2019.

2. Attended three Days AICTE Sponsored Faculty Development Programme on, “Students induction Program” by, Eswari engineering college.

3. Attended five days quality improvement program on “Advances in Refrigeration and air conditioning”at PEC,pondy.

4. Attended DST sponsored National Seminar on E-Waste management at Kongu College of Eng., at Erode on 11 & 12.01.2019.

5. Attended two days national level seminar on” challenges in Research orthopedic inplant materials” at VRS College of engineering.

6. Presented a Paper on, “Effects of injection hydrogen peroxide into a Diesel Engine” at SVCET, ICRIEST 18.

5. Mr. G.Palanivel

1. “Lathe Attachment Using Cutting Hacksaw Machine” Journal Of Emerging Technologies And Innovative Research, Volume 6 Issue 1, January-2019.

2. Attended a one week Faculty Development Programme on, “Teaching Methodology” by NITTR, SVCET, and June 24-30, 2018.

3. Attended a Workshop on, “Recent trends in automobile engineering”conducted by SVCET, January-05, 2019.

4. Attended a Workshop on “Research Trends on Smart Waste Management System for Batteries” conducted by Kongu College of engineering, Erode- 2019.

5. “Investigation of Pin-Fin Configuration for Efficient Heat Transfer andPressure Drop in Electronic Components” International Journal of Pure and Applied Mathematics, Volume 119 No. 14 2018, 929-937,May 2018.

6. “Performance And Emission Analysis of Di Diesel Engine Using Bio Diesel as Azolla Algae”, International Journal Of Engineering Science And Computing, Volume 8, Issue 4, April 2018. “Analysis of Arc Welding - Gas Welding and Adhesive Joint in Mild Steel Plate” International Journal for Science and Advance Research in Technology, Volume 8, Issue 10, October 2017

6. Mr.R.Kamalanathan

1. Attended 1 week FDP on Teaching Methodology conducted by NITTR.

2. One week Faculty Development Programme at SVCET, on the topic of “Teaching Methodology” by National institute of Technical Teachers Training and Research.

3. One week Faculty Development Programme at IFET, on the topic of “Strength of materials”.

4. One week Faculty Development Programme at IFET, on the topic of “Engineering Mechanics”.

5. One week Faculty Development Programme at IFET about Teaching Methodology by Annam Academy.

6. One day National Level Technical Symposium on the topic of “Renewable Energy Source” at Mailam Engineering College.

7. One-day International seminar at “Master Control Facility’ at Hassan in Karnataka. Published “Performance and characterization of Bio-Diesel from Sterculia seeds” in International Research Journal of Engineering and Technology (IRJET) Volume 5, Issue 12, 2019.

7. Mr. S.Sugumar

1. S.Sugumar, AR.Maheshkumar, “Performance Characteristics of Biodiesel Production from Karanja Oil” International Journal of Latest Engineering and Management Research, Vol 2, issue 8, August 2017, ISSN 2455-4857.

2. S.Sugumar, M.Shakthivel, “Thermal stress analysis of ceramic coated (MULLITE YSZ) piston using finite element analysis” International Journal for Scientific Research , Vol 5, issue , 2017, ISSN 2321-0613.

3. S.Sugumar, K.Madheshwaran (2015), “Mechanical Characterization of Aluminium – Boron Carbide Composites with Influence of Calcium Carbide Particles” International Journal of Engineering Technology and Advance Engineering, Vol 5, issue 7, JULY 2015, ISSN 2250-2459. S.Sugumar, B.Elamvazhudi (2015), “Wear Analysis on 7075 Aluminium Metal Matrix composites with Tio2 and Flyash Particles” International Journal of Research in Engineering science & Technologies, Vol 1, issue1, May 2015, ISSN 2454 5392.

4. Attended one day NPTEL workshop on 25th Jan 2018 conducted by IIT Madras.

5. Participated in Two Weeks Faculty Development

6. Program on “Nanotechnology for Energy and Agricultural Sectors” from 13th- 26th November, 2017 Sponsored by AICTE and conducted at IFET College of Engineering, Villupuram.

7. Participated in One Week Faculty Development programme on “Design of Machine Elements” from 17th – 23rd May 2017 Sponsored by Anna University at University college of Engineering, Panruti.

8. Mr. C.Manikandan

1. Review on Drop-Shaped Perforated Fins in Staggered Arrangement”, International journal of trends in research and development, Volume 3, Issue 1, p.p.181-182, 2016, ISSN: 2394-9333.

2. “Transient Thermal Simulation of Perforated Drop-Shaped Pin Fin Array in Staggered Arrangement”, Volume 5, Issue 2, p.p.2193-2202, 2016, DOI:10.15680/IJIRSET.2016.0502105.

3. “Fabrication and Testing of Compressed Air Car”, Two Day National Conference on Emerging Trends in Science, Engineering & Technology at A.C.T college of Engg and Tech.

4. “Atomic Energy Regulatory Board Sponsored Two Day National Workshop on Human Resource Development in Radiation Technologies and Applications” on 20 & 21st Jan, 2016 at P.A College of Engg and Tech, Pollachi.